What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.


Fitting mud gaurds to a MK 1 Mx 5 with a rear lip spoiler

User avatar
Mazda Mender
Site Admin
Posts: 12700
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west

Fitting mud gaurds to a MK 1 Mx 5 with a rear lip spoiler

Postby Mazda Mender » Wed Jul 30, 2014 7:22 am

I have been asked a few times to refit the rear spats (mud guards) to Mk 1's after fitting a rear lip spoiler, so this is a how to. I will add a PDF to print off as a template at a later date :handgestures-thumbup:

One rear Mk 1 spat...
DSC03560.jpg (57.35 KiB) Viewed 690 times

One template which can be used for both sides by just flipping it over...
DSC03561.jpg (67.18 KiB) Viewed 690 times

Mark up the spat by using the template with a marker pen...
DSC03562.jpg (59.78 KiB) Viewed 690 times

A Mazda menders tools of choice for the job...
DSC03563.jpg (99.31 KiB) Viewed 690 times

DSC03564.jpg (88.11 KiB) Viewed 690 times

Now the cutting; straights and angle with the angle grinder, the Dremel for the L piece (note the straight cut front to back showing through).
DSC03565.jpg (81.8 KiB) Viewed 690 times

Note the new cut from the straight cut which is on a angle. This is important for them to fit correct...
DSC03566.jpg (79.39 KiB) Viewed 690 times

And the cut out piece...
DSC03567.jpg (80.11 KiB) Viewed 690 times

Once cut out you can finish the cut out with a file etc. to finish...
DSC03568.jpg (72.34 KiB) Viewed 690 times

Passenger side all cut and fitted...
DSC03569.jpg (62.99 KiB) Viewed 690 times

DSC03570.jpg (62.27 KiB) Viewed 690 times

DSC03571.jpg (78.9 KiB) Viewed 690 times

DSC03572.jpg (65.75 KiB) Viewed 690 times

Drivers side all cut and fitted...
DSC03573.jpg (61.11 KiB) Viewed 690 times

DSC03574.jpg (69.31 KiB) Viewed 690 times

DSC03575.jpg (87.11 KiB) Viewed 690 times

DSC03576.jpg (90.28 KiB) Viewed 690 times

From the rear, both fitted...
DSC03577.jpg (83.24 KiB) Viewed 690 times

Any questions or pointers, just ask :handgestures-thumbup:
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.

Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “Body panels and accessories”

Who is online

Users browsing this forum: No registered users and 1 guest