What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Stainless Manifold Recommendations

Introduce yourself here. Tell us all about your passions and your pride and joy. We wont bite.
User avatar
blackyb
Moderator
Posts: 1524
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Stainless Manifold Recommendations

Postby blackyb » Wed Feb 21, 2018 11:09 pm

Some years back fitted a stainless steel rear section ( cat back) to our 91 1.6 Eunos, (yes I know I could decat her) and it gives her a nice little burble at low revs and growls when cruising the open roads.

I have been tinkering with the idea when finances allow to change the cast Mazda manifold for a nice shiney stainless one.

Any suggestions on the best in looks, value for money and so on.

:text-thankyouyellow:
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
blackyb
Moderator
Posts: 1524
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: Stainless Manifold Recommendations

Postby blackyb » Thu Feb 22, 2018 1:00 pm

No one with any kind suggestions, recommendations or advice

:confusion-confused:

Anyone bought and fitted the IL motorsports version as sold by MX5 Parts????

:bow-yellow:
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
GlennyGills
Moderator
Posts: 629
Joined: Tue Jul 10, 2012 8:13 pm
Location: Reading

Re: Stainless Manifold Recommendations

Postby GlennyGills » Thu Feb 22, 2018 1:31 pm

I bought the MX5 Parts one for my 1.8 and used with a SS system, certainly looks pretty. No problems with it.
https://www.mx5parts.co.uk/exhaust-mani ... p-646.html
'96 Gleneagles MeisterR Coilovers - engine bling stainless mx5parts full exhaust
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Stainless Manifold Recommendations

Postby Mazda Mender » Thu Feb 22, 2018 1:38 pm

A proper S/hand Jasma graded item everytime for me from Japan.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
blackyb
Moderator
Posts: 1524
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: Stainless Manifold Recommendations

Postby blackyb » Thu Feb 22, 2018 5:08 pm

Mazda Mender wrote:A proper S/hand Jasma graded item everytime for me from Japan.
M-m


And where would one look for one, the bay that has Es or :confusion-confused:
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!

Return to “Welcome desk”

Who is online

Users browsing this forum: No registered users and 15 guests