What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

Induction kit bracket help

General chat on all things Mx/Roadster
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 4:16 pm

Could anyone tell me the dimensions of the brackets u use wen installing
An aftermarket induction kit. 1.6 mk1 eunos
Thanks in advance
User avatar
flea
Site Admin
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 4:18 pm

Is it a K&N kit? If so i'll go & measure mine for you
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 4:29 pm

It's a pipercross . I presumed all the brackets were same as there to hold the air
Flow metre in place aren't they.
But I more than likely wrong
User avatar
flea
Site Admin
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 4:31 pm

I'll take a picture of mine & you can tell me if the sizes of mine will help?
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
User avatar
flea
Site Admin
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 4:36 pm

017.JPG
017.JPG (236.38 KiB) Viewed 3822 times
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 4:43 pm

Yea if u could get me sizes that be great
User avatar
flea
Site Admin
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 5:06 pm

Capture8.JPG
Capture8.JPG (33.11 KiB) Viewed 3818 times
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 5:11 pm

Thanks a lot pal u been a great help.
:)
User avatar
flea
Site Admin
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 5:38 pm

sorry mate i missed a measurement. The large L bracket should be 120 as well as the 100 as shown on the drawing
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 8:00 pm

Cheers pal it's appreciated
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 8:05 pm

I forgot ask what size is the small L shaped bracket
User avatar
flea
Site Admin
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 8:22 pm

Steyb38 wrote:I forgot ask what size is the small L shaped bracket
It only acts as a joiner from the straight section to the flow meter. Just enough to get the bolts through will do (see picture on the first page) :handgestures-thumbup:
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 8:54 pm

Cheers
User avatar
blackyb
Serial Poster
Posts: 868
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: Induction kit bracket help

Postby blackyb » Tue Mar 29, 2016 5:54 pm

Trying to make sense of the drawings in case my man cant find the associated metal work to go with the piper cross filter!!

Sure I will be able to bodge summat together??
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (Why did I sell it!!!!)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
Mazda Mender
Site Admin
Posts: 12530
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: Induction kit bracket help

Postby Mazda Mender » Tue Mar 29, 2016 11:26 pm

Wash your mouth out bry,,, we don't bodge .
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “Mx/Roadster Chat and Banter”

Who is online

Users browsing this forum: No registered users and 4 guests