What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Induction kit bracket help

General chat on all things Mx/Roadster
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 4:16 pm

Could anyone tell me the dimensions of the brackets u use wen installing
An aftermarket induction kit. 1.6 mk1 eunos
Thanks in advance
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 4:18 pm

Is it a K&N kit? If so i'll go & measure mine for you
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 4:29 pm

It's a pipercross . I presumed all the brackets were same as there to hold the air
Flow metre in place aren't they.
But I more than likely wrong
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 4:31 pm

I'll take a picture of mine & you can tell me if the sizes of mine will help?
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 4:36 pm

017.JPG
017.JPG (236.38 KiB) Viewed 23445 times
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 4:43 pm

Yea if u could get me sizes that be great
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 5:06 pm

Capture8.JPG
Capture8.JPG (33.11 KiB) Viewed 23441 times
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 5:11 pm

Thanks a lot pal u been a great help.
:)
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 5:38 pm

sorry mate i missed a measurement. The large L bracket should be 120 as well as the 100 as shown on the drawing
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 8:00 pm

Cheers pal it's appreciated
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 8:05 pm

I forgot ask what size is the small L shaped bracket
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Induction kit bracket help

Postby flea » Sat Nov 30, 2013 8:22 pm

Steyb38 wrote:I forgot ask what size is the small L shaped bracket
It only acts as a joiner from the straight section to the flow meter. Just enough to get the bolts through will do (see picture on the first page) :handgestures-thumbup:
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Steyb38
Just Run In
Posts: 42
Joined: Wed Aug 28, 2013 9:07 pm

Re: Induction kit bracket help

Postby Steyb38 » Sat Nov 30, 2013 8:54 pm

Cheers
User avatar
blackyb
Moderator
Posts: 1524
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: Induction kit bracket help

Postby blackyb » Tue Mar 29, 2016 5:54 pm

Trying to make sense of the drawings in case my man cant find the associated metal work to go with the piper cross filter!!

Sure I will be able to bodge summat together??
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Induction kit bracket help

Postby Mazda Mender » Tue Mar 29, 2016 11:26 pm

Wash your mouth out bry,,, we don't bodge .
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “Mx/Roadster Chat and Banter”

Who is online

Users browsing this forum: No registered users and 20 guests