What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

How to make a perfect liquid funnel for the mx5 for emergencies

Top tips....Just to make those jobs go that little bit easier.
User avatar
Mazda Mender
Site Admin
Posts: 12627
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

How to make a perfect liquid funnel for the mx5 for emergencies

Postby Mazda Mender » Tue Sep 04, 2018 12:10 am

Come on now admit it ....how many of us have done a road trip and have gone to check the the oil etc. (very important in a Mk 2 1.8 NB) and needed a top up, only to find that the oil you have or coolant or what ever's in the bottle is brimmed and you just know it is going to go everywhere - great news when trying to get oil in and you know it is going to be a nightmare...

Now even a standard funnel is rubbish to use use as it does not sit still with the thin long spout and gets backed up so you need to wait while the fluid finds its way through.
This is very simple to make...store it in the spare wheel for that "just in case" moment as you "know" it will happen at some point...

So let's get all Blue Peter for 30 minutes...

Whats needed...
A garden/cleaners or hairdressers water spray bottle 750ml (Anands your man)
A utility knife
Sissors
Marker pen
Sand paper


So get your spray bottle and mark it with your marker pen...

20180901_165402.jpg
20180901_165402.jpg (592.87 KiB) Viewed 51 times


20180904_092900.jpg
20180904_092900.jpg (655.77 KiB) Viewed 50 times


Then cut it off with either the Scissors or utility knife - please be careful - and cut off the screw cap end...

20180903_193738.jpg
20180903_193738.jpg (365.32 KiB) Viewed 51 times


20180903_193746.jpg
20180903_193746.jpg (385.79 KiB) Viewed 51 times


20180901_165418.jpg
20180901_165418.jpg (438.68 KiB) Viewed 51 times


20180901_165929.jpg
20180901_165929.jpg (401.31 KiB) Viewed 51 times


Using the utility knife trim the spout end bit off smooth (using a large cone step down drill bit made the job quicker)...

20180904_092414.jpg
20180904_092414.jpg (311.22 KiB) Viewed 50 times


Now rub the ends on the sand paper until they're straight'ish and smooth....

20180904_092214.jpg
20180904_092214.jpg (661.08 KiB) Viewed 50 times


20180904_092237.jpg
20180904_092237.jpg (643.44 KiB) Viewed 50 times


Then use the utility knife to remove the burrs and shave the edges...

20180904_125422.jpg
20180904_125422.jpg (356.89 KiB) Viewed 48 times


20180904_125432.jpg
20180904_125432.jpg (388.55 KiB) Viewed 48 times


20180904_125441.jpg
20180904_125441.jpg (430.73 KiB) Viewed 48 times


20180904_125511.jpg
20180904_125511.jpg (398.98 KiB) Viewed 48 times


And that's it...it locks into the rocker cover and the rad firmly, and it is not too big so is easily stored...large funnel end so the liquid goes in fast and does not back up like ones with a thin spout...great for that emergency funnel as it takes up no room.....

20180901_165423.jpg
20180901_165423.jpg (441.41 KiB) Viewed 51 times


20180901_165427.jpg
20180901_165427.jpg (395.34 KiB) Viewed 51 times


20180901_165432.jpg
20180901_165432.jpg (442.94 KiB) Viewed 51 times


20180901_165452.jpg
20180901_165452.jpg (395.8 KiB) Viewed 51 times


20180901_165512.jpg
20180901_165512.jpg (324.25 KiB) Viewed 51 times


20180901_165528.jpg
20180901_165528.jpg (412.76 KiB) Viewed 51 times


20180901_165553.jpg
20180901_165553.jpg (469.23 KiB) Viewed 51 times


20180901_165558.jpg
20180901_165558.jpg (442.46 KiB) Viewed 51 times


20180901_165743.jpg
20180901_165743.jpg (400.56 KiB) Viewed 51 times


Hope this is of help to someone at some point....happy motoring ..
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “Top Tips”

Who is online

Users browsing this forum: No registered users and 1 guest