What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Stainless manifold

User avatar
scarby
New
Posts: 10
Joined: Wed Oct 14, 2015 9:22 pm
Location: Prestwich

Stainless manifold

Postby scarby » Wed Jan 13, 2016 2:18 pm

I am thinking of putting a stainless manifold 4-2-1 on my MK1 eunos. Has anyone added one to there car, if so could you please advise if worth it. I already have stainless dcat and was thinking I will convert to full stainless starting with the manifold. Opinions or photo of one fitted would be welcome.
Cheers, scarby
scarby
Mk1 eunos 1.6 V-Spec
User avatar
Speedy
Epic Poster
Posts: 1694
Joined: Thu Dec 15, 2011 9:24 am
Location: Newport, Shropshire

Re: Stainless manifold

Postby Speedy » Wed Jan 13, 2016 3:05 pm

Changed my 1989 to a old four branch I had. Worth doing :handgestures-thumbup:

106.jpg
106.jpg (181.71 KiB) Viewed 10350 times
1989 Fresh import with 30,000 km, Maruha Four Pot calipers, 270mm disks, Rose jointed drop links, Uprated ARB's, MeisterR CRD Coilovers, Rota wheels, LSD, Zoom console, Maruha Alternator, Jenvey ITB's, Megasquirt ECU
1st Modified Class Bristol OC Spring Rally
2nd Weston Park April 2017
1st 'Modern Classic' Stafford Castle Classic Show July 2018
3rd 'Best Japanese Classic' Tatton Park Aug 18
1st Modified Class Ragley Hall OC National SEP 18
1st Easter show Weston Park 2019
2nd 80's class Newport Easter show 2019


2011 2.0 RC Sport Tech in Aluminium, Smart Top.
User avatar
scarby
New
Posts: 10
Joined: Wed Oct 14, 2015 9:22 pm
Location: Prestwich

Re: Stainless manifold

Postby scarby » Wed Jan 13, 2016 6:32 pm

Thanks, has it altered the sound and was relocating the oxy sensor difficult.
scarby
Mk1 eunos 1.6 V-Spec
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Stainless manifold

Postby Mazda Mender » Wed Jan 13, 2016 8:26 pm

Yes we have them fitted , just be careful of the cheap crap doing the rounds on the bay of E, if you can get a good s/hand s/steel JDM items with a jasma grade.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
scarby
New
Posts: 10
Joined: Wed Oct 14, 2015 9:22 pm
Location: Prestwich

Re: Stainless manifold

Postby scarby » Thu Jan 14, 2016 9:36 pm

Thanks for the advice Mm I have seen the ones on ebay and thought they looked ok so I will do more research. :text-thankyouyellow:
scarby
Mk1 eunos 1.6 V-Spec
User avatar
Pincherrn
Serial Poster
Posts: 388
Joined: Tue Nov 20, 2012 2:24 pm
Location: Telford, Shrops

Re: Stainless manifold

Postby Pincherrn » Sat Feb 27, 2016 10:08 pm

I have one off ebay on my Exocet build. Quality seems good but fit isn't brilliant. It is hard against the engine / gearbox flange and I've had to take an angle grinder to the flange. Would rather have a JDM manifold and will look for one for my S Special.
MEV Exocet.
1995 1.8 Mk1 White Roadster. S Special Type I.
Exocet build thread - http://www.mazdamenders.net/forum/viewtopic.php?f=35&t=1138
http://www.jansholistics.co.uk/
User avatar
GlennyGills
Moderator
Posts: 629
Joined: Tue Jul 10, 2012 8:13 pm
Location: Reading

Re: Stainless manifold

Postby GlennyGills » Mon Feb 29, 2016 1:42 pm

I bought a MX5Parts S/S Manifold and exhaust system. See my picture here [Glennygills] (viewtopic.php?f=62&t=5649) I was suggested to buy an extension for the Oxygen sensor, but they sent the wrong part and we found that the existing cable was JUST long enough.
'96 Gleneagles MeisterR Coilovers - engine bling stainless mx5parts full exhaust
User avatar
scarby
New
Posts: 10
Joined: Wed Oct 14, 2015 9:22 pm
Location: Prestwich

Re: Stainless manifold

Postby scarby » Mon Feb 29, 2016 10:47 pm

Thanks Ive looked at a few now but holding off as I was unsure plus I thought I would take a look at Cobalt who have confirmed they will be attending mx5oc spring rally
scarby
Mk1 eunos 1.6 V-Spec
User avatar
blackyb
Moderator
Posts: 1524
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: Stainless manifold

Postby blackyb » Wed Mar 02, 2016 7:27 pm

Just been thinking about this very same subject for our 91 Eunos. Will keep my eyes peeled on this topic for a definitive answer and route to follow.

:obscene-drinkingcheers:
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (shouldnt have sold it)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
Mickcafc
Regular
Posts: 242
Joined: Sat Jun 15, 2013 12:36 pm
Location: Norway

Re: Stainless manifold

Postby Mickcafc » Wed Aug 03, 2016 8:07 pm

Hi all, mines in having lots done and I'm thinking of sending a new manifold for them to fit. I'm thinking of the Racing Beat or Jackson Racing. As they are fitting a JR cold air induction for me would JR be the best choice for manifold too? I have a Milltek exhaust, If that changes anything. Thanks guys and gals.
Mickcafc
Regular
Posts: 242
Joined: Sat Jun 15, 2013 12:36 pm
Location: Norway

Re: Stainless manifold

Postby Mickcafc » Wed Aug 03, 2016 8:08 pm

Oops, 1990 1.6
Mickcafc
Regular
Posts: 242
Joined: Sat Jun 15, 2013 12:36 pm
Location: Norway

Re: Stainless manifold

Postby Mickcafc » Sun Aug 07, 2016 11:29 am

Any preferences? JR or RB, and why?
Mickcafc
Regular
Posts: 242
Joined: Sat Jun 15, 2013 12:36 pm
Location: Norway

Re: Stainless manifold

Postby Mickcafc » Sun Aug 07, 2016 6:44 pm

Ordered the Racing Beat manifold and decat race pipe (whatever that is) hope it's not too loud. Let you know how it is next week when I'm back in the country.
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Stainless manifold

Postby Mazda Mender » Mon Aug 08, 2016 7:15 am

All the ones we have ever had, have come from Japan when we imported them over and fitted to the roadsters, they all do the same thing ,it just comes down to build quality really.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “MK1 -1989 > 1997 (NA)”

Who is online

Users browsing this forum: No registered users and 7 guests