What you put in, you'll get back ten fold

How to fit a aftermarket water pump gaskets....

User avatar
Mazda Mender
Site Admin
Posts: 12960
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west

How to fit a aftermarket water pump gaskets....

Postby Mazda Mender » Tue Apr 18, 2017 6:59 am

Now there is a lot of talk about using c*ck up liquid gasket seal when doing this and other jobs around the roadsters like the CAS and rocker seals also, i hate the stuff,It is a lazy way to seal up and in most cases hide an issue without doing the job correct, it is more the aftermath further down the line that grinds me ,because when lazy c*ck person and there magic crap fails ,,,which it will, the honest spannner guys get left with sorting all the mess out which then takes twice/3 times as long as it should of been done in the first place to do the job correct....
I am sure i am not the only one that as spent hours either picking it all from the top of the engine, in it all over the rocker cover or CAS,water pump and inlet,and thermostat ....in some of the best case it as squashed and seeped into the engine and coolant system helping the block the oil pump and thermostats when it turns into hard bits of rubber, it is nasty stuff don't use it, i get the "quick fix" but when spending the time to take apart and rebuild them,,,, :angry-banghead: :angry-banghead: .

20170408_122108.jpg (563.48 KiB) Viewed 790 times

20170408_122053.jpg (509.67 KiB) Viewed 790 times

20170408_122101.jpg (684.59 KiB) Viewed 790 times

20170408_122258.jpg (550.76 KiB) Viewed 790 times

20170408_122305.jpg (617.98 KiB) Viewed 790 times

20170408_122439.jpg (586.04 KiB) Viewed 790 times

20170408_122447.jpg (540.54 KiB) Viewed 790 times

20170408_123317.jpg (461.33 KiB) Viewed 790 times

20170408_123329.jpg (431.15 KiB) Viewed 790 times

20170408_123334.jpg (439.16 KiB) Viewed 790 times

20170408_123341.jpg (396.38 KiB) Viewed 790 times

20170408_131105.jpg (474.34 KiB) Viewed 790 times

20170408_131110.jpg (510.15 KiB) Viewed 790 times

20170408_131120.jpg (502.81 KiB) Viewed 790 times

The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.

Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt
Mk 1 Eunos 95 blue G-ltd 1.8...being refurbed
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “MK1 -1989 > 1997 (NA)”

Who is online

Users browsing this forum: No registered users and 1 guest