What you put in, you'll get back ten fold

Undersealing/and cavity protection.....and being careful who you use

User avatar
Mazda Mender
Site Admin
Posts: 13417
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: Undersealing/and cavity protection.....and being careful who you use

Postby Mazda Mender » Fri Nov 08, 2019 7:18 am

5 to 6 for undersealing depending on how good you want it and mark, around 5 for cavity depending on mark.
winter project attack?
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
njonesn
Just Run In
Posts: 36
Joined: Sun May 06, 2018 5:27 pm
Location: Ely, Cambridgeshire

Re: Undersealing/and cavity protection.....and being careful who you use

Postby njonesn » Fri Nov 08, 2019 10:11 pm

ale.28r wrote:It is almost new and I have a can of RC900 and 2 of Dinitrol cavity wax. Just wanted to buy the necessary as I don’t have too much room for stuff I don’t need


I ordered 6 cans of this for my 10AE https://www.ebay.co.uk/itm/4x-500ml-Qli ... 4376149290
Have to say it comes out quicker than I expected so ordered a 7th can (only had a little left in the 6th can when I got to the doors/boot lid).
10th Anniversary Edition (1999 NB)

Return to “MK2/2.5 - 1998 > 2000/ 2001 > 2005 (NB)”

Who is online

Users browsing this forum: No registered users and 1 guest