What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

Braided Brake Lines

ElliottW
New
Posts: 10
Joined: Wed May 20, 2015 1:28 pm

Braided Brake Lines

Postby ElliottW » Thu Jan 07, 2016 4:59 pm

A little while ago I fancied up rating my brake lines from the standard ones to braided. I did a little shopping around and whittled it down to either HEL Performance or Goodridge. Goodridge are zinc plated fittings where the HEL lines were stainless, so I decided on HEL. When they arrived, I noticed they were missing the middle fitting on the front lines (where it attaches to the wishbone) but they came with P clips, so in my stupidity I fitted them anyway. The fitting at the chassis side of the line was also different to the OEM line, so the bracket had to be modified.

After driving the car, I raised the car back up to inspect the lines and found that the fronts had been scrubbing on the wheels.

I wasn't really impressed with the lines so I got in touch with HEL and they were actually very helpful on the phone. They sent me out a replacement set of brake lines immediately from MX5 Parts (their stainless steel lines with aluminium fittings) so I could still drive the car. These were exact replacements for my old ones and fitted perfectly with no dramas and they don't scrub either! HEL said they would redevelop their brake lines, but they never got back to me. To be honest I'm very happy with the quality and fit of the MX5 Parts lines that I haven't chased them up (although I probably should of). They give a really good feel through the pedal and give me a lot more confidence when I have brake hard for what ever reason.

So to summarise my waffling, HEL didnt fit at all (although they said they would redevelop them), MX5 Parts lines fitted perfectly and I haven't heard or read anything about Goodridge lines on the MK3.

Thanks
ElliottW
User avatar
Mazda Mender
Site Admin
Posts: 12627
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: Braided Brake Lines

Postby Mazda Mender » Thu Jan 07, 2016 7:38 pm

Nice info buddy.
M-m.
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
flea
Site Admin
Posts: 6617
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Braided Brake Lines

Postby flea » Thu Jan 07, 2016 7:56 pm

Thanks for posting Elliot
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8

Return to “MK3”

Who is online

Users browsing this forum: No registered users and 1 guest