What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

FAQ Request - Fitting Fog Lamps Mk2.5

Tell us what you have done or want to do, or any problems you have hit that we can help you with
User avatar
agent_orange
Epic Poster
Posts: 1444
Joined: Tue Mar 06, 2012 11:22 pm
Location: London

FAQ Request - Fitting Fog Lamps Mk2.5

Postby agent_orange » Sun Mar 18, 2012 8:41 pm

I would like to request a FAQ on how to fit fog lamps onto a Mk2.5

This is something I have been wanting to do for yonks, and is something that should not be hard to achieve, but (for me atleast) I cant find a straight forward answer as to how to go about this. Yes there is tonnes of information from various people on various forums, but the only thing I have established for sure is how to get the plastic blanks out of the nose cone, and that there is no wiring already in place.

And to make things interesting, rather than just being plain fog lamps, could they be used as part of the side lights (because we dont get that much fog in the UK right? :lol: )
Image
2003 Mk 2.5 Euphonic Velocity Red Sadly died of rust cancer
1999 Mk2 VS
1991 Mk1
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: FAQ Request - Fitting Fog Lamps Mk2.5

Postby Mazda Mender » Sun Mar 18, 2012 9:34 pm

Why not just wire them in so you can switch them on when ever you want, but will only work with the ignition on, on the lighting circuit?

I'l tell you what to use, and where from, and you can take pic's and a do write up to post up on here as it will work for all Mk's and models,for everyone else to use.
It's dead easy.
so are you becoming a mazda mender sir and getting your hands dirty?
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
agent_orange
Epic Poster
Posts: 1444
Joined: Tue Mar 06, 2012 11:22 pm
Location: London

Re: FAQ Request - Fitting Fog Lamps Mk2.5

Postby agent_orange » Mon Mar 19, 2012 2:36 pm

Sure, Im up for writing the article. After all I was going to suggest my five should do the photo modelling :lol:

Does your method require the special dual fog lamp switches, or can this be done with the existing switch?

mazda-mender wrote:so are you becoming a mazda mender sir and getting your hands dirty?
M-m

hmmm mazda-modder maybe ;)
Image
2003 Mk 2.5 Euphonic Velocity Red Sadly died of rust cancer
1999 Mk2 VS
1991 Mk1
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: FAQ Request - Fitting Fog Lamps Mk2.5

Postby Mazda Mender » Mon Mar 19, 2012 4:37 pm

I'll have a look inside her later and see what she as to use.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/

Return to “Your mods”

Who is online

Users browsing this forum: No registered users and 2 guests