What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

New heat shield

Tell us what you have done or want to do, or any problems you have hit that we can help you with
Post Reply
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

New heat shield

Postby flea » Fri Dec 23, 2011 3:44 pm

Thought id share this with you :D

My mate made me a new stainless heat shield with with spacers to keep it away from the bodywork & some new boot drain washers :D

Image

Image
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
User avatar
Skuzzle
Serial Poster
Posts: 311
Joined: Tue Dec 06, 2011 6:12 pm

Re: New heat shield

Postby Skuzzle » Fri Dec 23, 2011 4:13 pm

that looks very well made.
I took mine off completely, though not a great idea if you use the car for shopping.. cause it all gets cooked.
Top
User avatar
Mazda Mender
Site Admin
Posts: 15097
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:
Contact Mazda Mender

Re: New heat shield

Postby Mazda Mender » Fri Dec 23, 2011 6:35 pm

Thats looks ace flea man, make me one.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Top
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: New heat shield

Postby flea » Fri Dec 23, 2011 7:01 pm

mazda-mender wrote:Thats looks ace flea man, make me one.
M-m

I already asked him how much they would cost to make just in case anyone asked. He said Ă‚ÂŁ80 but that was for them big washers where the boot drains are also the spacers with stainless washers for fixing. He could do it cheaper i recon with thinner stainless steel. Not cheep mate.

I could do a drawing for you & you may be able to get someone nearer cheaper?
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
User avatar
Mazda Mender
Site Admin
Posts: 15097
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:
Contact Mazda Mender

Re: New heat shield

Postby Mazda Mender » Fri Dec 23, 2011 7:05 pm

Yeah ,send me the measurements and i can get one made up :D
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Top
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: New heat shield

Postby flea » Fri Dec 23, 2011 7:11 pm

mazda-mender wrote:Yeah ,send me the measurements and i can get one made up :D
M-m

Ok mate will do. It wont be right away as you know im busy putting flea back together. I'll take a load of pictures when the Buccaneers get together to fit all the other stuff the day after boxing day for a spread on hear ;) Nicks gonna do the write up as im fick when it comes to that sort of stuff :oops: plus that,s what he does for a living ;)
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: New heat shield

Postby flea » Fri Dec 23, 2011 11:18 pm

Drawing sent to your email Mazy
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
User avatar
Mazda Mender
Site Admin
Posts: 15097
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:
Contact Mazda Mender

Re: New heat shield

Postby Mazda Mender » Sat Dec 24, 2011 12:21 am

Thats ace flea dude, thank you very much, if you could post it up for everyone else to use, thats what this site was created for, that would be great, and i am sure Nick will archive it with your name on for good.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Top
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: New heat shield

Postby flea » Sat Dec 24, 2011 12:27 am

Updated drawing for the heat shield

Image
Last edited by flea on Mon Dec 26, 2011 12:40 pm, edited 1 time in total.
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: New heat shield

Postby flea » Mon Dec 26, 2011 12:20 pm

This drawing should be better than that tatty other one :whistle:
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
User avatar
Risingsun
Serial Poster
Posts: 350
Joined: Wed Dec 07, 2011 9:00 pm
Location: The (Air) Port of Gatwick Surrey
Contact:
Contact Risingsun

Re: New heat shield

Postby Risingsun » Thu Dec 29, 2011 12:40 am

Having seen this heatshield in the flesh, I must admit it looks great...
1991 Mk1 1.6 BBR Le-Mans now sold
1994 Mk1 1.8 Import
2019 Mk4 2.0 30th Anniversary

http://www.mxfivers.com
Top
User avatar
Badknee
Serial Poster
Posts: 382
Joined: Wed Dec 14, 2011 11:13 pm
Location: Bolton, Lancs.

Re: New heat shield

Postby Badknee » Thu Dec 29, 2011 11:32 pm

Top stuff guys, mines as tatty as a tatty thing that's errrrrrrrrr, in tatters. :D
Paul & Angela.
'93 1.8 in Super Silver
Fully blinged up (thanks M-m)
Lowered into the weeds hung on Gaz Gold Pro's.
Top
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: New heat shield

Postby flea » Thu Dec 29, 2011 11:39 pm

Thanks guy's help yourself to the drawing just right click on the sketch & save.
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8
Top
Post Reply

Return to “Your mods”

Who is online

Users browsing this forum: No registered users and 8 guests