What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

NC Seats Updated

Anything goes in here.. within reason
User avatar
vindaloo
Just Run In
Posts: 20
Joined: Fri Mar 31, 2017 10:05 pm
Location: Leigh, Lancashire

NC Seats Updated

Postby vindaloo » Thu Jun 29, 2017 6:17 pm

Recently had my seat covers changed to a different design, Black and perforated Red Leather, work carried out in 3-4 hours whilst waiting. Very pleased with the quality. Complete seats and door cards included as was the gear and handbrake gaitors. All parts of the seat are leather including backs and sides.
Here is a picture.


Image
2008 NC 2.0 Sport
Engine/Driveline: BBR/AT Power 42mm 'Super 225' individual throttle body conversion, BBR Super 200 cams, BBR EcuTek remap, Racing Beat 4-1 stainless steel exhaust manifold, GWR Roadstersport 2.5 inch stainless mid pipe with 200 cell sports cat, GWR Roadstersport 'Super Q' silencer, Supertech uprated valve springs, Supertech Ti valve spring retainers, K&N air filter in modified OEM housing with 3 inch MAF housing, Odula RS intake scoop, modified breather/PCV system with catch can, Competition Clutch 5.35kg lightweight flywheel, Flyin' Miata Level 1 clutch
Chassis: Ohlins 'Road&Track' DFV coilovers, Eibach anti-roll bars with Superpro bushes, ILM chassis braces (front/middle/rear lower), Auto-Exe Japan front upper strut brace
User avatar
Mazda Mender
Site Admin
Posts: 12662
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: NC Seats Updated

Postby Mazda Mender » Fri Jun 30, 2017 6:37 am

Nice, the fit looks good to.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
blackyb
Moderator
Posts: 898
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: NC Seats Updated

Postby blackyb » Sat Jul 01, 2017 1:15 pm

That's the kind of style I would like to get my seats covered in??
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (Why did I sell it!!!!)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
vindaloo
Just Run In
Posts: 20
Joined: Fri Mar 31, 2017 10:05 pm
Location: Leigh, Lancashire

Re: NC Seats Updated

Postby vindaloo » Fri Jul 07, 2017 9:35 am

Door cards match Image
2008 NC 2.0 Sport
Engine/Driveline: BBR/AT Power 42mm 'Super 225' individual throttle body conversion, BBR Super 200 cams, BBR EcuTek remap, Racing Beat 4-1 stainless steel exhaust manifold, GWR Roadstersport 2.5 inch stainless mid pipe with 200 cell sports cat, GWR Roadstersport 'Super Q' silencer, Supertech uprated valve springs, Supertech Ti valve spring retainers, K&N air filter in modified OEM housing with 3 inch MAF housing, Odula RS intake scoop, modified breather/PCV system with catch can, Competition Clutch 5.35kg lightweight flywheel, Flyin' Miata Level 1 clutch
Chassis: Ohlins 'Road&Track' DFV coilovers, Eibach anti-roll bars with Superpro bushes, ILM chassis braces (front/middle/rear lower), Auto-Exe Japan front upper strut brace
User avatar
blackyb
Moderator
Posts: 898
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: NC Seats Updated

Postby blackyb » Fri Jul 07, 2017 9:29 pm

can I be cheeky and ask on the price of the seat covers!!
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (Why did I sell it!!!!)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
Mazda Mender
Site Admin
Posts: 12662
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west
Contact:

Re: NC Seats Updated

Postby Mazda Mender » Tue Jul 11, 2017 12:22 pm

He is on his jollies Bry.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
blackyb
Moderator
Posts: 898
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: NC Seats Updated

Postby blackyb » Tue Jul 11, 2017 8:53 pm

Wish I was on me jollies, back driving 44 tons around for a few days.
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (Why did I sell it!!!!)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
vindaloo
Just Run In
Posts: 20
Joined: Fri Mar 31, 2017 10:05 pm
Location: Leigh, Lancashire

Re: NC Seats Updated

Postby vindaloo » Mon Jul 24, 2017 7:56 pm

The seats, door cards, gear and handbrake gaitors supplied and fitted ÂŁ500 plus VAT
2008 NC 2.0 Sport
Engine/Driveline: BBR/AT Power 42mm 'Super 225' individual throttle body conversion, BBR Super 200 cams, BBR EcuTek remap, Racing Beat 4-1 stainless steel exhaust manifold, GWR Roadstersport 2.5 inch stainless mid pipe with 200 cell sports cat, GWR Roadstersport 'Super Q' silencer, Supertech uprated valve springs, Supertech Ti valve spring retainers, K&N air filter in modified OEM housing with 3 inch MAF housing, Odula RS intake scoop, modified breather/PCV system with catch can, Competition Clutch 5.35kg lightweight flywheel, Flyin' Miata Level 1 clutch
Chassis: Ohlins 'Road&Track' DFV coilovers, Eibach anti-roll bars with Superpro bushes, ILM chassis braces (front/middle/rear lower), Auto-Exe Japan front upper strut brace
User avatar
blackyb
Moderator
Posts: 898
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: NC Seats Updated

Postby blackyb » Wed Jul 26, 2017 10:30 pm

Hmmmm, xmas pressie maybe
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (Why did I sell it!!!!)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
User avatar
GlennyGills
Serial Poster
Posts: 411
Joined: Tue Jul 10, 2012 8:13 pm
Location: Reading

Re: NC Seats Updated

Postby GlennyGills » Thu Jul 27, 2017 1:18 pm

Where did you get these fitted ?
'96 Gleneagles MeisterR Coilovers - engine bling stainless mx5parts full exhaust
User avatar
vindaloo
Just Run In
Posts: 20
Joined: Fri Mar 31, 2017 10:05 pm
Location: Leigh, Lancashire

Re: NC Seats Updated

Postby vindaloo » Sat Jul 29, 2017 9:49 am

GlennyGills wrote:Where did you get these fitted ?



http://www.theseatsurgeons.co.uk/
2008 NC 2.0 Sport
Engine/Driveline: BBR/AT Power 42mm 'Super 225' individual throttle body conversion, BBR Super 200 cams, BBR EcuTek remap, Racing Beat 4-1 stainless steel exhaust manifold, GWR Roadstersport 2.5 inch stainless mid pipe with 200 cell sports cat, GWR Roadstersport 'Super Q' silencer, Supertech uprated valve springs, Supertech Ti valve spring retainers, K&N air filter in modified OEM housing with 3 inch MAF housing, Odula RS intake scoop, modified breather/PCV system with catch can, Competition Clutch 5.35kg lightweight flywheel, Flyin' Miata Level 1 clutch
Chassis: Ohlins 'Road&Track' DFV coilovers, Eibach anti-roll bars with Superpro bushes, ILM chassis braces (front/middle/rear lower), Auto-Exe Japan front upper strut brace

Return to “General chat and banter”

Who is online

Users browsing this forum: No registered users and 3 guests