/>
/> 
/> 
hi all i have a chance to swap out my 5 speed with open diff from my uk 1997 1.6 to a 6 speed from a 1.8 including torsen , driveshafts ,prop shaft , gearbox and all the associated bolts.
are there any problems that i may face in doing the swap ?
thanks all.
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
mk1 6speed
-
drumtochty
- Moderator
- Posts: 429
- Joined: Sun Aug 26, 2012 10:21 pm
- Location: Auchenblae, Aberdeenshire
Re: mk1 6speed
The drive shafts changed around 1993 so you should be OK there. You will end up with the car revving higher at 70 on the motorway but better on the track. I would keep the 5 speed as I do not track the car and like it to be quieter on the open road.
1999 Mk2 Silver
2008 Mk3 Copper Red gone
2018 Mk4 GT+ Red
Drumtochty Glen, Auchenblae, Aberdeenshire
2008 Mk3 Copper Red gone
2018 Mk4 GT+ Red
Drumtochty Glen, Auchenblae, Aberdeenshire
Who is online
Users browsing this forum: No registered users and 30 guests
