What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Fault Code Reader Card

Come and see what our Jon is up to, with his electric gizmos that his mind and hands mould into magic little boxes of tricks, he gets bored very easily, so if you have an idea that you can throw at him, all the better for him to play with ;0)
drumtochty
Moderator
Posts: 429
Joined: Sun Aug 26, 2012 10:21 pm
Location: Auchenblae, Aberdeenshire

Fault Code Reader Card

Postby drumtochty » Thu Mar 05, 2015 6:50 pm

Jon,

i have just used one of your fault code readers and it worked just fine doing a flash test.

using the same connections as the fault code tests , I tried to do the Switch tests and none of them worked it is a 92, 1.6.

Are the jumper connections the same for both test routines?

Some say to use the mem connector for the switch test.
1999 Mk2 Silver
2008 Mk3 Copper Red gone
2018 Mk4 GT+ Red
Drumtochty Glen, Auchenblae, Aberdeenshire

Return to “Binarypunk mods & products”

Who is online

Users browsing this forum: No registered users and 12 guests