What you put in, you'll get back ten fold
Having problems logging in? Please clear your cache and remove the MazdaMenders related cookie from your browser.
If you need assistance doing this, don't hesitate to contact us on FaceBook or email forum-admin@mazdamenders.net stating the browser you use.

Regards
Admin

Fault Code Reader Card

Come and see what our Jon is up to, with his electric gizmos that his mind and hands mould into magic little boxes of tricks, he gets bored very easily, so if you have an idea that you can throw at him, all the better for him to play with ;0)
drumtochty
Moderator
Posts: 356
Joined: Sun Aug 26, 2012 10:21 pm
Location: Auchenblae, Aberdeenshire

Fault Code Reader Card

Postby drumtochty » Thu Mar 05, 2015 6:50 pm

Jon,

i have just used one of your fault code readers and it worked just fine doing a flash test.

using the same connections as the fault code tests , I tried to do the Switch tests and none of them worked it is a 92, 1.6.

Are the jumper connections the same for both test routines?

Some say to use the mem connector for the switch test.
1999 Mk2 Silver
2008 Mk3 Copper Red
Drumtochty Glen, Auchenblae, Aberdeenshire

Return to “Binarypunk mods & products”

Who is online

Users browsing this forum: No registered users and 1 guest