What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Megasquirt ms2

User avatar
roadster1980
Moderator
Posts: 553
Joined: Thu Sep 27, 2012 12:27 pm
Location: Wigan

Megasquirt ms2

Postby roadster1980 » Wed Aug 06, 2014 9:48 pm

I've just recently purchased a ms2 off eBay just waiting on delivery
Question is can anybody recommend me a boost solenoid and injectors that are of good quality but not stupid expensive
I've seen ebc for about 70 new is this the going rate
Injectors are my limiting factor as I want to up my boost level and see about 240-250fwhp so about 210-220whp
What are the best injector size for the boost level needed to reach this goal
td-05 turbo@.6bar 190.8hp
Build thread
viewtopic.php?f=35&t=1399
User avatar
Lazza
Site Admin
Posts: 2580
Joined: Thu Dec 08, 2011 12:05 am
Location: Wokingham
Contact:

Re: Megasquirt ms2

Postby Lazza » Thu Aug 07, 2014 9:55 am

Lots of people seem to be using RX8 injectors for that level of power. I haven't looks but they must be available at a reasonable price.
I have 550cc RC injectors which are barely ticking over at 240bhp.
Lazza

2001 Mk2.5 MX5 1.8 Sport
Hard Dog Deuce
GAZ Gold Pro
Mk3 seats
17” OZ Racing Superturissmo wheels (for the toad)
15” Rota Circuit 10 wheels (for track use)
User avatar
BenF
Epic Poster
Posts: 1233
Joined: Sun Dec 23, 2012 12:50 pm
Location: Bath, Swindon or Noordwijk(NL)

Re: Megasquirt ms2

Postby BenF » Thu Aug 07, 2014 12:04 pm

roadster1980 wrote:I've just recently purchased a ms2 off eBay just waiting on delivery
Question is can anybody recommend me a boost solenoid and injectors that are of good quality but not stupid expensive
I've seen ebc for about 70 new is this the going rate
Injectors are my limiting factor as I want to up my boost level and see about 240-250fwhp so about 210-220whp
What are the best injector size for the boost level needed to reach this goal


Hello mate,
EBC - electronic boost controller - is not something I've had a lot of involvement with as all the turbo's we've worked with so far have been VTG (variable turbine geometry) or VVT (variable vane technology) units, or manual and vacuum driven boost control. We have an ex-WRC celica GT4 in at the moment which uses a fixed Garrett turbo and wastegate (an old-school setup) and that uses a G-Reddy unit, but I've not had time to play with it yet. G-reddy aren't cheap I know that much! but you can probably find something on the 'bay?
For injectors you're best off googling injector calculator which with some simple inputs for cylinders, RPM, fuel pressure availablilty (36-46 psi on a stock pump, but 240 is a big ask), etc. etc. will give your flow rates required. Go safe and never exceed 80% duty cycle. It sounds like Laz is around 50-60% on his which is very very safe :handgestures-thumbup:
For suplly and help, find a guy on ebay/the web who trades as 'injectortune' - he knows his stuff and has worked with just about all things - he's who I use - and he's helpful :cool:
User avatar
roadster1980
Moderator
Posts: 553
Joined: Thu Sep 27, 2012 12:27 pm
Location: Wigan

Re: Megasquirt ms2

Postby roadster1980 » Thu Aug 07, 2014 12:18 pm

Thanks for the response guys ill go take a look now
td-05 turbo@.6bar 190.8hp
Build thread
viewtopic.php?f=35&t=1399
User avatar
nedski
Serial Poster
Posts: 733
Joined: Fri Jun 01, 2012 11:17 pm
Location: North Kelsey, Market Rasen
Contact:

Re: Megasquirt ms2

Postby nedski » Thu Aug 07, 2014 5:38 pm

Let us know how you get on.

Benf - I must be sold so old school I'm ancient. :obscene-buttsway:
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
User avatar
roadster1980
Moderator
Posts: 553
Joined: Thu Sep 27, 2012 12:27 pm
Location: Wigan

Re: Megasquirt ms2

Postby roadster1980 » Thu Aug 07, 2014 8:39 pm

I do have a brand new Greddy e01 boost controller sat here at home and I was going to connect it up to the emanage blue looking in the box there is a solenoid with the kit would this be compatible with the megasquirt so as to use it Image
td-05 turbo@.6bar 190.8hp
Build thread
viewtopic.php?f=35&t=1399
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Megasquirt ms2

Postby Mazda Mender » Fri Aug 08, 2014 3:11 pm

roadster1980 wrote:I do have a brand new Greddy e01 boost controller sat here at home and I was going to connect it up to the emanage blue looking in the box there is a solenoid with the kit would this be compatible with the megasquirt so as to use it Image

I don't see why not it cannot be used with it. it is only a control box at the end of the day, ,just needs to be wired in correct.
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
nedski
Serial Poster
Posts: 733
Joined: Fri Jun 01, 2012 11:17 pm
Location: North Kelsey, Market Rasen
Contact:

Re: Megasquirt ms2

Postby nedski » Fri Aug 08, 2014 5:20 pm

Mine is old school and operates with manually with boost at 1 bar.
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
User avatar
nedski
Serial Poster
Posts: 733
Joined: Fri Jun 01, 2012 11:17 pm
Location: North Kelsey, Market Rasen
Contact:

Re: Megasquirt ms2

Postby nedski » Fri Aug 08, 2014 5:27 pm

I dont know if the megasquirt has the facility to operate a boost controller. But to be honest i have a MS but don't know all that much about them to advise anyone.
Are you going to run 2 different maps with a high and low boost setting ?
Mk1 1.6 Turbo. Gaz shocks. Tr Lane roll bar.
Garage Owner, Lincolshire
Helper to the Scunny track day crew and North Linc's Track Day Club.
www.stokesofkelsey.co.uk
User avatar
roadster1980
Moderator
Posts: 553
Joined: Thu Sep 27, 2012 12:27 pm
Location: Wigan

Re: Megasquirt ms2

Postby roadster1980 » Sat Aug 09, 2014 6:34 pm

No it doesn't it has it built in just need a boost solenoid so it can be turned up hence me asking about the solenoid in the above kit whether it would work or not
td-05 turbo@.6bar 190.8hp
Build thread
viewtopic.php?f=35&t=1399
User avatar
Skuzzle
Serial Poster
Posts: 311
Joined: Tue Dec 06, 2011 6:12 pm

Re: Megasquirt ms2

Postby Skuzzle » Sat Aug 09, 2014 11:30 pm

Right up my street. Call me next week on my mobile *********** The landlines down with the move to the new unit :(
Mac solenoids seem to be pretty much the best choice for ms2. Rx8 yellow injectors are great for 220ish bhp.
User avatar
roadster1980
Moderator
Posts: 553
Joined: Thu Sep 27, 2012 12:27 pm
Location: Wigan

Re: Megasquirt ms2

Postby roadster1980 » Sun Aug 10, 2014 8:58 am

Thanks skuzzle I was looking at the mac ones on ebay as they stated they supply the big brands like AEM ect I've so been told I'd need bigger than 440 to be safe, as I want to run the standard fuel reg as the one I have is failing
I'll give you a call on Monday mate
td-05 turbo@.6bar 190.8hp
Build thread
viewtopic.php?f=35&t=1399
User avatar
Skuzzle
Serial Poster
Posts: 311
Joined: Tue Dec 06, 2011 6:12 pm

Re: Megasquirt ms2

Postby Skuzzle » Sun Aug 10, 2014 4:55 pm

What power do you want. 200whp is achievable on 440s
User avatar
roadster1980
Moderator
Posts: 553
Joined: Thu Sep 27, 2012 12:27 pm
Location: Wigan

Re: Megasquirt ms2

Postby roadster1980 » Sun Aug 10, 2014 6:48 pm

200whp is my target skuzzle, so as long as that do-able on 440cc on standard fuel reg I want to get rid of all the piggy back crap on the car like the rrfpr and emanage blue
If not then I'll just get bigger ones to run with standard fuel reg to get as close to 200whp as possible I'm currently on rrfpr 295cc injectors and emanage blue at 190fwhp so a big jump like that would be perfect
Ste
td-05 turbo@.6bar 190.8hp
Build thread
viewtopic.php?f=35&t=1399
User avatar
flea
Moderator Wannabe
Posts: 6618
Joined: Wed Dec 07, 2011 8:42 pm
Location: Medway towns, Kent

Re: Megasquirt ms2

Postby flea » Sun Aug 10, 2014 7:00 pm

Can you please edit out / or i will if you like your phone number. Just in case :handgestures-thumbup:
Have you taken note of the number Ste?
Eunos 1.6 special 1989 with a few added extras
Eunos 1991 1.6
Eunos 1990 1.6 project
Mk2 1999 1.8

Return to “Turbo chargers”

Who is online

Users browsing this forum: No registered users and 2 guests