What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****

Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .

*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***

And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.


M-m

Clunk from n/s rear

Got a problem, need some advice ?
Get in here and ask the pros. There will always be one to bring you the correct answer, quickly.
Please bare in mind advice offered by some may not be correct. Pay attention to user ratings and status for a better idea on their knowledge.
Straightspeed
Posts: 1
Joined: Wed Nov 22, 2017 9:05 pm

Clunk from n/s rear

Postby Straightspeed » Wed Nov 22, 2017 9:21 pm

I'm struggling to solve a "clunk" from the rear when I pull off from a standing start. One clunk, it appears to be from the nearside rear. Poor or bumpy road surface doesn't effect it, nor does changing gear, although coming off throttle at low speed will generate it. I've recently put on coilovers and replaced worn drop links, however the noise was there before. I've had the wheels off and cant see anything loose, and using a pry bar I cant find anything obvious. Any help would be appreciated.
User avatar
Mazda Mender
Site Admin
Posts: 15069
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land, in the glen of Wiganshire
Contact:

Re: Clunk from n/s rear

Postby Mazda Mender » Thu Nov 23, 2017 8:49 am

Have you had her jacked up ? check the prop and drive shafts, wheel nuts tight?
M-m
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.


Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build


http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
GlennyGills
Moderator
Posts: 629
Joined: Tue Jul 10, 2012 8:13 pm
Location: Reading

Re: Clunk from n/s rear

Postby GlennyGills » Fri Nov 24, 2017 1:28 pm

Could it be a sticking brake after applying the handbrake.
'96 Gleneagles MeisterR Coilovers - engine bling stainless mx5parts full exhaust

Return to “Problems”

Who is online

Users browsing this forum: No registered users and 19 guests