Trim

What you put in, you'll get back ten fold

well what a great start to the year, look at this weather, lets be honest we deserve it and need it, hope you're enjoying all those car meets going on and making the most of it,..NEWS....massive thank you to Mr Steve owner of Goodwood Sports cars for believing in what we do and sponsoring the forum so fellow owners can use her to help in saving cash and keeping them on the road where they belong, other news is we are shuffling a plan together for a dedicated you tube channel for everyone to use, which will also have guests videos to help, bit more on that as we finalise it all, lets see those builds and any guides needed please just ask, enjoy the roof down weather.

New Topic

14 topics • Page 1 of 1

Topics

Replies

Views

Last post

MK 1 mx5/Eunos/Miata /bongo ashtray refurb

Last post by Mazda Mender « Mon Jul 22, 2019 12:29 pm

Attachment(s) by Mazda Mender » Mon Jul 22, 2019 12:29 pm

This is a very simple quick guide on how to refurb a MK 1 Eunos/Roadster/Mx5/Miata/Bongo centre arm rest ashtray, over the years the metal goes rusty from the use of the "fags" which also becomes very smelly and the plastic losses its colour and luster from the heat from the...

0 Replies

4764 Views

Last post by Mazda Mender View the latest post
Mon Jul 22, 2019 12:29 pm
Dash removal - UPDATED 01/03/2017

Last post by Mazda Mender « Tue Mar 05, 2019 7:36 am
Replies: 1
Attachment(s) by Mazda Mender » Sat Dec 08, 2012 9:36 pm

Mk2 dash into a Mk1

****SECTION ONE****

If you're looking to update the interior of your mk1, probably one of the best ways to do this is to replace the mk1 dashboard with a mk2 unit. Whilst it may seem like a big job, it's actually fairly easy for anyone who can wield a screwdriver and a...

1 Replies

4558 Views

Last post by Mazda Mender View the latest post
Tue Mar 05, 2019 7:36 am
Dials - how to make them

Last post by Hamish « Sat Aug 10, 2013 8:29 pm
Replies: 1
by Hamish » Sat Aug 10, 2013 5:37 pm

This is a placeholder for a how to on making dials - the DIY way.

I have been asked a lot of times how to do this and I am more than happy to share and help where I can. The 'How To' will be split into three parts:

1. Design
2. Making them and cutting them
3. Fitting them

Being a stickler for...

1 Replies

4668 Views

Last post by Hamish View the latest post
Sat Aug 10, 2013 8:29 pm
Matt Cowl mod

Last post by landwomble « Mon Jul 08, 2013 3:52 pm

by landwomble » Mon Jul 08, 2013 3:52 pm

I was sick of the sun reflecting off the shiny surface of the dashboard cowl in my Mk1 Eunos, so I decided to do something about it.

As standard on the NA, these are shiny plastic, and on bright days they reflect into the windscreen.

Later models had a more satin finish, which is better, but...

0 Replies

4143 Views

Last post by landwomble View the latest post
Mon Jul 08, 2013 3:52 pm
TR Lane Roll bar fitting , My You tube guide. Link

Last post by nedski « Mon Jun 10, 2013 9:04 pm

by nedski » Mon Jun 10, 2013 9:04 pm

This is My Guide to fitting a TR Lane roll bar. I posted it to help people out so perfect for on here i think.
Hope the link works :-D

0 Replies

4107 Views

Last post by nedski View the latest post
Mon Jun 10, 2013 9:04 pm
loose eye ball vents repair

Last post by Mazda Mender « Tue Dec 25, 2012 5:11 pm

Attachment(s) by Mazda Mender » Tue Dec 25, 2012 5:11 pm

If your dash eye ball vent droop and drop down then this is what to do to cure it.

The pictures below show where to split the two and what to do, please do not just try doing this in your hands, as a little force is needed, and I do not want to be blamed for any stitches.

Remove the eye ball...

0 Replies

4154 Views

Last post by Mazda Mender View the latest post
Tue Dec 25, 2012 5:11 pm
Early to late Mx/Roadster rear view mirror swap....

Last post by Mazda Mender « Fri Dec 30, 2011 1:13 pm

Attachment(s) by Mazda Mender » Fri Dec 30, 2011 1:13 pm

I have had a lot of owners asking about this,so they can fit a KG works mirror?
But this one came around because the wrong windscreen had been fitted ,so using a standard mirror with all the bits.

First off you will need to remove the interior light, which you can re-route to the early type dash...

0 Replies

4474 Views

Last post by Mazda Mender View the latest post
Fri Dec 30, 2011 1:13 pm
A post trim removal tips.

Last post by blackyb « Wed Oct 23, 2024 1:44 pm
Replies: 3
by blackyb » Tue Oct 22, 2024 10:03 pm

So, I am planning on upgrading my in car entertainment system to a DAB enabled radio.

To mount the DAB receiver I need to remove the trim from the nearside A post.

Never done this before but I am sure some of you super Menders (Mm) will have.

Tips and advice appreciated....

3 Replies

2555 Views

Last post by blackyb View the latest post
Wed Oct 23, 2024 1:44 pm
Bonnet pull release repair MK 1-MK 2/2.5 89-05

Last post by Mazda Mender « Wed Dec 21, 2022 8:09 am

Attachment(s) by Mazda Mender » Wed Dec 21, 2022 8:09 am

****If you have found this walk through guide useful and saved you time and money , please think about giving a donation to help keep this site going to help other owners just like yourself please.****

There are and will be quite a few Mk1 and Mk2/2.5 owners that have either hit this problem or...

0 Replies

1943 Views

Last post by Mazda Mender View the latest post
Wed Dec 21, 2022 8:09 am
MK 1 NA ...How to remove eye ball air vents

Last post by Mazda Mender « Sun Jan 15, 2017 12:13 pm

by Mazda Mender » Sun Jan 15, 2017 12:13 pm

M-m

0 Replies

3986 Views

Last post by Mazda Mender View the latest post
Sun Jan 15, 2017 12:13 pm
Door rubber bump stop guide, cusioners

Last post by Mazda Mender « Wed Mar 23, 2016 12:09 am

Attachment(s) by Mazda Mender » Wed Mar 23, 2016 12:09 am

Where to begin on this subject :angry-banghead:

Right there is some proper crap on the web, all about these so called all singing all dancing aftermarket rubber door bump stops, and some even 3D printed( give me a break please)....
The claims are....
1) They stiffen the roadster up...

0 Replies

5579 Views

Last post by Mazda Mender View the latest post
Wed Mar 23, 2016 12:09 am
MK 2 hood on a MK 1,,,,don't forget these to....

Last post by Mazda Mender « Tue Nov 03, 2015 12:07 am

Attachment(s) by Mazda Mender » Tue Nov 03, 2015 12:07 am

When owners fit a MK 2/2.5 frame and hood onto a Mk 1 they ALWAYS forget that they will also need these to, other wise when you drop the hood it will get caught and worn by the pinch bolts and over a short period of time WILL make a lovely hole on each side of the hood..

REMOVE,,,,,,,,,

The MK 1...

0 Replies

8390 Views

Last post by Mazda Mender View the latest post
Tue Nov 03, 2015 12:07 am
Jammed door will not open?........

Last post by Mazda Mender « Tue Mar 31, 2015 12:12 pm

by Mazda Mender » Tue Mar 31, 2015 12:12 pm

jammed door

Which in 9 out of 10 cases is the little spring on the locking mech as snapped....
(pics to follow)

Drop the roof,window down ,be it electric or keep fit, unscrew all the fittings off the door, start at the bottom and start popping the door card free you will hit one that will not...

0 Replies

5078 Views

Last post by Mazda Mender View the latest post
Tue Mar 31, 2015 12:12 pm
Leather seat renovation / recolouring

Last post by Pendric Lumpybeard « Sat Nov 09, 2013 10:37 am

by Pendric Lumpybeard » Sat Nov 09, 2013 10:37 am

My Eunos V-special suffered from what is a very common issue on these cars, i.e. worn leather seats, the driver's being particularly bad. It showed quite heavy cracking on the seat base and side cushions, some scuffing and the usual 'hole' where the leather had worn through on the back bolster...

0 Replies

7650 Views

Last post by Pendric Lumpybeard View the latest post
Sat Nov 09, 2013 10:37 am

New Topic

14 topics • Page 1 of 1

Return to Board Index

Who is online

Users browsing this forum: No registered users and 1 guest

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum