After having replied to a topic on the OC forum re: spark plug problems, it has reminded me that i have a 14mm spark plug insert tool that only gets used a couple of times a year.....so if you have a stripped spark plug hole or even a siezed plug that your frightened to remove, worry not if your...

I'm no mechanic , but I've got a pair of helping hands if anyone needs a lift with anything 5 related :-)

Hi all,

As per does anybody around Bedfordshire offer bodywork services who could help me out? A DIY'er with good knowledge is welcome to apply!

I'm on a limited budget, but will listen to all quotes. I can offer autoelectrical services or mechanical know how in a bit of mutal back-scratching if...

Hi everyone
I'm Steve from Hull,if you have a problem with your mx5 roadster or thinking of viewing a car to buy and need advice what to look for etc let me know and I will gladly try to help.
:roll:

I hope this is okay to put this in this section.
I own a 91 mk1 mx5 and she is currently sat in a garage workshop in the corner (long story). She has no doors on, no bonnet, bumper or wings on and no windscreen in. I need to get her and the bits but more just her from basingstoke way to Sandhurst...

Wayne the guy on Nuts with the bolt he could not get undone from the alternator popped round to the flea pit today.
All sorted :handgestures-thumbup: That's my good deed for the day :-D

Got to say what a lovely car he has. Standard but clean as a whistle.

Hi all
My exhaust is knocking on the underside of the car on acceleration which I thinks down to knackered engine mounts.
I have had the car up on my small ramps at home to replace the mounts today,unfortunately due to injury from a bike accident I can't get the leverage on the bolts whilst under...

Can anyone help a owner going to check this out in DESFORD, LEICESTERSHIRE on sunday the 5Th

M-m

If you are local to either Saltash or Plymouth, or down this way on holiday and need a helping hand, I can offer use of a garage with basic tools and a cracking cuppa T and biscuits.

Neil

That can nip round and help this chap???
Sounds like a 1.8.

M-m

Spare pair of hands and a huge hammer available in Somerset. Some daintier tools are also available.

Rosko has a Shogun and Tow Rope if needed,Will also feed and Lubricate drivers. :auto-layrubber:

M-m

same as others, im only a DIY mechanic, but have carried out my own turbo install, timing belt change, water pump ect ect,

ive got use of our works workshop, so warm and dry, a full array of tools, air line and oxy acetylene if needed,

can be reached through PM on here, ill also add an email...

Would it help to set up a UK map with tags of where volunteers are based.
If you needed one you could search the most local visually on a map and get their name, email and phone number (or whatever details they wanna give out)

I don't mind helping out if anyone is in need.
I am not qualified mechanic but have done all my own work on my morris minor, then the spitfire and now I own a Mk 1 5.
My garage is tiny but I get by your more than welcome to pm me for help.

Just to let you know that help is on hand for any mechanical work on your mx5 in worcestershire, fully fitted garage with lifts, tools ect. If you want to do it your self with help on hand or if you just want it done, then contact me. Mal

For going out of your way to help a fellow owner out when they needed it most :dance:
you are a mazda-mender :-D
M-m

Hi Wayne

I'd be more than happy to offer my limited services to anybody with problems in this area.

No doubt most areas can be covered by someone.

There's one across the road and one in the street opposite!

Cheers

Mike

And now all is well in the scott camp :dance:
M-m

Hi I'm Roy. I live in Chatham, Kent.

Id like to help the best i can. If i can't i'm sure i can call on some friends for advice to point us in the right direction if you have any problems or need assistance.

We have a very well equiped double garage here in bolton if anyone is stuck for a placeto get out of the bad weather, tools, jacks, MIG welder etc.

Give me a ring on 07793 847 836 if I can be of any help. :coffee: