Like anything, everything is easy once shown....this will be a quick guide on how to remove the instrument dial clusters in a MK 1/MK 2-2.5 ( MK 3 and 4 to be added)...
Tools needed...
1 x medium phillips driver.
A pair of hands.
So Mk 1 first...
Go underneath of the stalk switch cowling and you will see 3 x phillips head screws in the recess that secures the top half of the cowl together and a threaded phillips head bolt that secures the bottom half of the cowling solid to the stalk switch body...remove them all and split the cowling cover apart with a simple pull and put both half's safe with the fittings...
Next is the two phillips head screws that hold the instrument dail cover in place which are underneath on either side, remove those and put safe...
Now we can remove the cover which is still held in place to the dash by 3 x metal push fit clips which will require a bit of gentle force to release them depending on how long it as been since the last removal , it is plastic and can be brittle, get your fingers underneath and give some sharp yangs, it will help to pop one side at a time and then the middle clip.... it will pop out, this is why we love the MK 1's everything was over engineered, once you have popped it free remove it and put safe with the screws...
Now we need to remove the 4 x phillps head screws that hold the instrument cluster in place, in all 4 corners, put the screws safe once removed...
Now here is the fun bit that no one seems to like or get there knickers in a twist?, Get hold of the cluster on both sides and pull towards you with a sharp jurk to release it from the speedo cable socket, trust me it will release, i understand why people are hesitant at first with the resistance..Then unplug the 2 electric plugs from the back( note this is the early type, the later type will have another connection to unplug for the Heated rear window warning on light, on your left on the rear)
An thats it, its out, now to just change a bulb you can just pop the speedo drive and leave the cluster plugged in and just twist the bulb holder out of the one not working, swap the bulb in the holder and put back into place again with a twist to lock back in place and turn on the lights to test, even more so if fitting crappy LED's as the are pole sensitive so my need to be a certain way in the holder to work.....
Make sure on re-fitting that you pop the speedo socket back onto the speedo clock...
And then just refit everything the same backwards from removed.
MK 2/2.5 next.....
If you have found this guide to be useful, helpful or as helped you with your roadster with saving on garage costs , please consider making a donation to keep these gates available for others and so new info can still be added to carry on helping.
What you put in, you'll get back ten fold
***** THIS IS VERY IMPORTANT TO THE SITE AND HELPING YOU,OTHERWISE IT CLOSES AND ALL THIS ON LINE GARAGE IS GONE FOR GOOD*****
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
Greetings and welcome to menders, this site was built for every owner that might need her to help keep those bills low and also keep them on the road where they belong, she is run by very passionate enthusiasts owners for passionate enthusiastic owners, see her like a on line garage, there is a lot of tech stuff hopefully explained for everyone to use, if there is something you cannot get your head around, or you feel that there is a strong walk through guide missing that needs creating by one of us or from yourselves, please let us know, we are also on false book and youtube, which as short tech vids to help, and again if you feel there is a vid that would help please get it touch.
the menders is free, but like everything there is a cost to run things and bills( we are just happy its not a heating cost), so if we have saved you hundreds, please throw a small donation in the pot so we can keep on going to carry on helping others in the same way .
*** we are currently looking for a sponsor for this year, so if you have the passion and can see this sites worth to everyone , please get in touch and step forward to help***
And thank heavens that we are now on the way back up the brighter ,warmer longer days, "come on summer", and lets see those project builds.
M-m
How to remove the instrument dial cluster to replace bulbs etc...For Oliver wilson-hall
- Mazda Mender
- Site Admin
- Posts: 15099
- Joined: Tue Dec 06, 2011 6:18 pm
- Location: Pie land, in the glen of Wiganshire
- Contact:
How to remove the instrument dial cluster to replace bulbs etc...For Oliver wilson-hall
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
- Mazda Mender
- Site Admin
- Posts: 15099
- Joined: Tue Dec 06, 2011 6:18 pm
- Location: Pie land, in the glen of Wiganshire
- Contact:
Re: How to remove the instrument dial cluster to replace bulbs etc...For Oliver wilson-hall
So MK 2/2.5, this is even easier than the MK 1 as they are not built to the same over engineered standard....
Pop the top half of the stalk switch cowling apart(Yes no screws to undo) and put some where safe...
Then get your fingers under/behind the instrument cover ( yes no screws) and give some sharp yangs for the 3 x palstic holding clips to pop free one either side and one in the middle at the back....
Then remove the 4 x phillps head screws that holds the instrument cluster to the dash in each corner and put them safe....
Then you can pull the cluster towards you, the speedo is electric driven so no cable connection to pop like the mk1's, unplug the wire connection plugs which there is 3 in total, one at either side at the top and one in the centre at the top...
And thats it its out, just like the MK 1 you do not need to fully remove the cluster to just change bulbs, pulling it towards you is enough once un-screwed to just twist the blown bulb out with the holder to be replaced , refit and test.
Refit everything back in reverse order as removed.
If you have found this guide to be useful, helpful or as helped you with your roadster with saving on garage costs , please consider making a donation to keep these gates available for others and so new info can still be added to carry on helping.
Pop the top half of the stalk switch cowling apart(Yes no screws to undo) and put some where safe...
Then get your fingers under/behind the instrument cover ( yes no screws) and give some sharp yangs for the 3 x palstic holding clips to pop free one either side and one in the middle at the back....
Then remove the 4 x phillps head screws that holds the instrument cluster to the dash in each corner and put them safe....
Then you can pull the cluster towards you, the speedo is electric driven so no cable connection to pop like the mk1's, unplug the wire connection plugs which there is 3 in total, one at either side at the top and one in the centre at the top...
And thats it its out, just like the MK 1 you do not need to fully remove the cluster to just change bulbs, pulling it towards you is enough once un-screwed to just twist the blown bulb out with the holder to be replaced , refit and test.
Refit everything back in reverse order as removed.
If you have found this guide to be useful, helpful or as helped you with your roadster with saving on garage costs , please consider making a donation to keep these gates available for others and so new info can still be added to carry on helping.
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.
Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 .
Mk 1 Eunos 90 1.6 soul red ..f/ build
MK 2.1/4 Blue V.S Roadster 1.8 99 ..
MK1 1.8 ,white import.. (Ashleighs)
MK1 1.6 yellow J ltd import.f/build
MK 1 1.8 black Tokyo Ltd..f/build
http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
Who is online
Users browsing this forum: No registered users and 2 guests