What you put in, you'll get back ten fold
********Wishing everyone a far better 2021 after our blur of a year in 2020 as we go into lockdown 3 and the new begining of the end of our leaning on the EU to find our own road again, I am sure it will all sort itself out again in the end as I am sure it will not be easy, as we also battle with China virus, please stay safe and strong as all our mental health tries to make sense of it all, we are still here on line for those that need our help on the spanner side to keep sane to erras all the madness around us, we are on you tube, FB and here if needed, by posting ,messages of email etc*********
The mazdamenders team

Copy parts from a Seller on the Bay of E, be aware

Come in and have a look at the magic world of our Vlad with his magic hands and great mind, to turn anything into a piece of working art if there is anything you think that is needed in the world of the Mx/roadster, or missing, let him know, has he his another that is not happy unless he is creating something new.
User avatar
Mazda Mender
Site Admin
Posts: 14294
Joined: Tue Dec 06, 2011 6:18 pm
Location: Pie land,North west

Copy parts from a Seller on the Bay of E, be aware

Postby Mazda Mender » Fri Dec 06, 2019 8:10 am

I bought a part from a seller on the bay of E advertising a Jass performance off set number plate bracket etc , item arrived super quick, but on opening it it up it was clear from the off set that this was not a Jass performance product, it arrived in a jiffy bag wrapped in shrink wrap ,not bubble wrap, sealed and a jass sticker with a part number on?
So i unwrapped the bits, off set seamed ok but is a black textured dull paint to a Jass gloss powder coated one ( yes i have one on another roadster)....then i take a look at the bits,,,,it arrived with two bolts and nuts and two small washers and a oval disc that looks like it might be galvanized??? the disc is not long enough or wide enough for it to be bolted to a OE tie down eye and the bolts etc are steel ( S/steel on the Jass product) with no large anchor washer for the underneath of the towing eye to make it tight and secure, he has copied the kit that is meant to be bolted to the Jass performance bracket by removing the OE tie down eye, so this copy will never be a straight fit ever straight from them/him???

The Co? is or seems the be based on the bay of e, the chap seems to have thick skin and is also copying a lot of others parts/accessories that others have worked hard on to design and his cop out phrase is " it's not branded" which makes this ok to leech so that means it is open season chaps on all your products by them/him? to copy .

They /He as since removed the blatant use of Jass performance name from the description and picture, and is making known to me that it is "not a direct copy" which it clearly is for a number of reasons

Co??? is Krmparts which i am sure is a bay of e cop out name....https://www.ebay.co.uk/usr/krmparts?_tr ... 7675.l2559 KRMparts

337 Valley Road

I have no idea how he is getting 100% feed back, because even with this copy it is not a direct fit, i will be leaving feed back, and i wait to see if this is removed???I have also contacted Vlad about this and Andrew ( Autolinkmx5 ) as he is also copying his products which he as even had the nerve to re use Andrews part number and full description..... https://www.ebay.co.uk/itm/Front-offset ... 2479639623

Watch what you are buying with your hard earned people, the leeches are not just in China..
IMG_20191206_071842.jpg (505.37 KiB) Viewed 8985 times
IMG_20191206_071845.jpg (498.21 KiB) Viewed 8985 times
IMG_20191206_071849.jpg (409.61 KiB) Viewed 8985 times
IMG_20191206_071852.jpg (504.91 KiB) Viewed 8985 times
The Disclaimer:-
This post is a natural product made from recycled electrons. The slight variations in spelling and grammar enhance its individual character and beauty and in no way are to be considered flaws or defects, the articles/answers/comments are provided for information purposes and they are not intended to substitute informed professional advice, I or mazdamenders.net cannot personally be hold responsible for any damage occurred from following this procedure or any injuries from it. Proceed at your own risk.

Mk 1 Eunos 93 black V.S II 1.8 ,
Mk 2 .1/4 Roadster 99 black & gold V.S 1.8 being rebuilt,
Mk 1 Eunos 90 1.6 (claimed by daughter)
MK 2.1/4 Blue V.S Roadster 1.8 99 ...being rebuilt

http://www.mx5oc.co.uk/ http://www.mx5nutz.com/forum/ http://miata.net/ http://www.autolinkuk.co.uk/
User avatar
Posts: 1293
Joined: Tue Sep 17, 2013 8:41 pm
Location: Scarborough

Re: Copy parts from a Seller on the Bay of E, be aware

Postby blackyb » Fri Dec 06, 2019 12:19 pm

Duly noted.

There are a lot of cheap copies out there for all makes and models.
1993 1.6 Eunos Roadster (gone)
1998 UK Mk 2 1.6 (gone)
2003 1.8 SVT Sport (Why did I sell it - cos the wife said so!!!!)
1991 1.6 Eunos Roadster with a bit of bling.

Life is a journey, best travelled topless in an MX5!!
Posts: 63
Joined: Tue Feb 14, 2012 10:41 pm

Re: Copy parts from a Seller on the Bay of E, be aware

Postby jass » Fri Dec 06, 2019 5:45 pm

Thanks Wayne. Clearly another one, who will never see an MX5 in his life, but wants to feed his children without going to work.
Great factual article and warning, referencing for google the counterfeit business, his name and auctions.
I should probably make here a topic warning about all illegal eBay copies. For some of them I am having "Beware-Of" auctions in my eBay account:

(my only feedback is from the "business"a above, who sold copy of my product under my name to me)

Return to “Jass performance”

Who is online

Users browsing this forum: No registered users and 2 guests